🏅 Lock In Lock Out Procedure

Step 1: Shutdown Preparation. Before initiating a lockout/tagout procedure, determine the type and amount of energy produced by the equipment, and study the proper protocols. Notify everyone at work of the impending downtime. Notifying individuals ahead of time decreases the possibility of an unintentional restart. 29 CFR 1910.147 requires employers to establish a program and use procedures for affixing appropriate lockout devices or tagout devices to energy isolating devices, and to otherwise disable machines or equipment to prevent unexpected energization, start-up or release of stored energy in order to prevent injury to employees. Lockout exceptions. OSHA provides some exceptions that allow for equipment service or maintenance without using lockout procedures. The first is for “cord and plug” equipment. If a tool or machine can simply be unplugged, and the worker performing the service remains in control of the plug, then lockout procedures aren’t necessary. Review Your Lockout/Tagout Procedures Annually. The first step in an annual audit is to perform a review of all machine-specific lockout/tagout procedures. The purpose of the procedure audit is to identify any deviations or inadequacies in the current procedure. When you review a procedure, be sure to ask these three questions: When someone publishes a procedure based on the template, the DATE HERE is replaced with the month and year that the next audit is due. The due dates are based on the audit interval. (An administrator sets the audit interval in Lockout/Tagout > Logout/Tagout Admin > Edit Settings. See Lockout/Tagout - Edit Settings for more information.) For Recently, one of our subscribers asked the following question: Our general energy control LOTO procedure states that the key for a persona lock must be secured and controlled on a person when the LOTO lock is being used. Does the standard cover this? OSHA interprets the LOTO rule requirement for who controls the lockout devices (see 29 CFR 1910 Luckily, the following outlined key elements for a lockout tagout program will help you keep your workers safe and avoid becoming a statistic due to non-compliance. 1. Develop and Document a Lockout Tagout Program or Policy. The first step to lockout tagout success is developing and documenting your equipment energy control policy/program. The contents of a lockout tagout procedure checklist. A lock-out tag-out procedure checklist assurance varies in scope and content depending on the type of machine or plant and the industry in question. However, six sections can be found in every process template and safety checklist. 1. Information on the plant or machine Equipment Specific Visual Lockout Procedure Example. There are a variety of components in a visual lockout tagout procedure that will help ensure your employees will get home safe. Use this helpful guide to determine what elements are required for compliance, and best practices to complete an even safer lockout procedure. 1. In the Lockout/Tagout Procedure, if more than one individual is required to lock out equipment, each shall place his or her own personal lockout device or tagout device on the energy-isolating device (s). When an energy-isolating device cannot accept multiple locks or tags, a hasp or lockbox may be used. 5.1 Lock out – Tag out (LOTO) equipment There are two administrative control mechanisms used for preventing equipment from operating in the workplace. Lock out Lock out is a physical lock and (“Danger Isolation, Do Not Operate”) tag placed on plant or equipment to hold an energy isolation device in a safe position to prevent the lockout/tagout policy will be utilized. Use of the lockout/tagout procedure will eliminate possible unexpected energization, startup, or release of stored energy that could cause injury or death. (EO1) EMPLOYER’S RESPONSIBILITIES Under 29 CFR 1910.147, employer’s must develop an energy control program for the control of hazardous energy. .

lock in lock out procedure